What's involved in a Vehicle Wrap?
Vehicle wraps are comprised of three phases. The first is the design phase which includes getting accurate measurements for the vehicle and actual design of the graphics to be applied. The second is the production phase where the graphics are printed and then laminated to protect the vinyl from abrasions and UV rays that can cause graphics to fade over time. The third phase is installation where the vinyl is actually applied to your vehicle.

What's the difference between a partial and full wrap?
Anything less than a full wrap is normally referred to as a "partial wrap." a half partial wrap normally includes the entire rear of the vehicle and halfway up the vehicle, and includes a hood logo. a three-quarters partial wrap normally includes the entire rear of the vehicle and most of the way up the vehicle, and includes a hood logo. Typically, a full wrap covers the entire painted surface of the vehicle.

How long will the wrap stay on my vehicle?
Normally, you can leave a wrap on between one to five years. The life of your wrap depends on many factors. Typically, a high performance cast vinyl wrap using solvent long-life inks and a UV protective overlaminate can last more than three years.

Will a Vehicle Wrap damage my paint?
In most cases vehicle wraps will not damage factory paint jobs. It is important to talk with your supplier and possibly pre-test your paint job prior to wrapping your vehicle. Paint in poor condition and painted bumpers may peel when vinyl is removed.

Do I have to wash my vehicle before installation?
Yes. All vehicles have to be free of dust, mud, wax, oil, armor-all type products, and other agents that may prevent the vinyl from adhering to the vehicle surface during the installation process. Even if you clean the vehicle yourself your installer will still do some prep work to the vehicle to ensure it is ready for the vehicle wrap. After washing, it is also critical to prep the vehicle surface with de-greasers, alcohols and other solvents.

Do I need to bring my vehicle in for measurements?
That depends. We have a software program that has accurate dimensions of most standard production-run cars, trucks, and vans. If your vehicle is a limited issue or custom made, additional measurements may be needed. When feasible, we prefer that customers bring their vehicles in beforehand so they can be inspected and photographed.

How long will it take to wrap my vehicle?
The time required to wrap a vehicle varies widely from project to project. Generally, vehicle wraps can be completed in one day.

If my vinyl graphics become damaged, can they be fixed?
Yes. normally the damaged vinyl graphic area of your vehicle wrap can be replaced after your vehicle is repaired. Occasionally the new graphic will have a slight color variation from the existing wrap due to color fading and ware. 

Can I have my leased vehicle wrapped?
You should always obtain permission to wrap a leased or rented vehicle. Leased vehicles are often wrapped without incident or damage.

How do I care for my Wrap?
Hand washing is best. Always avoid void high pressure washes and be careful never to use an ice scraper on window graphics. There are specially designed products to clean and polish vinyl graphics, so ask your supplier.

What is considered when calculating the cost of a Vehicle Wrap?
There are several things to consider: design time, materials (including vinyl and lamination), print, and installation. The size of the vehicle, amount of the vehicle to be wrapped and type of vehicle also play a part in cost. In general, vehicles with compound curves like a VW Bug or PT Cruiser, are more difficult and more expensive to wrap than a box truck with flat surfaces.

How can I justify the cost of a vehicle wrap?
There is no greater cost-effective advertising method available than a wrapped vehicle. It has been proven that the cost per impression (CPI) of vehicle wraps is less than other forms of advertising such as billboards, television, radio and yellow pages.

Can I easily remove vinyl graphics from my vehicle?
Yes, in most cases, the wrapped can be removed using a heat gun or hair dryer to soften the vinyl. In general, vinyl graphics become more difficult to remove the longer they remain on the vehicle because the adhesives tend to build up a stronger bond over time. There are special chemicals and tools available to assist in the removal of vinyl.

Can I see through vinyl on the windows?
You can see through window graphics that are printed on perforated window film. Window perf vinyl is perforated with very small holes that allow you to see out. From inside the vehicle, visibility is similar to regular window tint. From the outside, the graphic is visible. NYS law prohibits the use of vinyl graphics on the front windshield and forward driver and passenger windows. The rear windshield and rear windows on passenger and driver sides can have vinyl graphics applied.

Is it normal for a Vehicle wrap to have some wrinkles or bubbles?
Yes, on a full wrap it is normal to have an occasional wrinkle or bubble. There are many techniques to reduce imperfections when wrapping, but even professional, certified installers can't eliminate all wrinkles on severely concave or rounded surfaces. Normally, on flat surfaces, there should not be any wrinkles or bubbles.

What are the advantages of a Vehicle Wrap as opposed to a new paint job?
With vehicle wraps, a designer's creativity and design possibilities are limitless. Paint simply cannot duplicate what is possible with digitally printed vinyl vehicle graphics. Vinyl vehicle wraps are also a great way to protect your original paint underneath. Finally, it is much easier to change your vehicle wrap vinyl graphics than to change a paint job.